I am a returning customer
Your Account Has Been Created!
Congratulations! Your new account has been successfully created!
You can now take advantage of member privileges to enhance your online shopping experience with us.
If you have ANY questions about the operation of this online shop, please e-mail the store owner.
A confirmation has been sent to the provided e-mail address. If you have not received it within the hour, please contact us.
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Precision Ladder LLC
Precision Ladders, LLC has evolved from a company named Precision Parts Corporation that was founded in Nashville, Tennessee in 1942. During Precision’s early days in Nashville, the firm was engaged in war work and continued until the end of World War II in machining gray-iron castings and steel forgings to an extremely close tolerance and with the high degree of skill required of precision parts – hence the company name. In 1944, as the work for both the Army and Navy expanded, Precision worked for a time as a subcontractor for the Tennessee Eastman Corporation on the Atomic Energy Program at Oak Ridge.
After the war Precision began manufacturing a variety of different products, a folding stairway was designed and produced. Both wooden and aluminum folding stairways were built, along with a one-piece all electric stairway.
Precision Parts Corporation was sold in 1978 and relocated to Whitesburg, Tennessee and the only employee who relocated with the company was former President, Steve Richey. In 1983, Mr. Richey, with another partner, purchased the company and moved it to Morristown, Tennessee.
The line of folding stairways was complimented with fixed aluminum vertical ladders and aluminum ships ladders, and had grown enough that in 1986, Precision Stair Corporation was created, and moved to another Morristown location to manufacture these products.
In 1998, the company underwent a bit of restructuring and became what is now known as Precision Ladders, LLC.
Since 1942, Precision been a leading manufacturer of commercial-grade access products including fixed aluminum ladders, ships ladders, roof hatches and folding stairways for either attic access or roof access. Today's Precision Ladders product line is not limited to commercial or industrial applications. They can also be found in many single family residences as well as multi-family residential projects..
Precision Ladders Products
Super Simplex Disappearing Stairways
The Super Simplex is Precision's commercial-grade aluminum folding stairway. Its primary use is as an attic stairway, but when fitted with a Precision roof hatch can be used for roof access. These may be used for ceiling heights up to 12' 0" in commercial applications and up to 13' 6" for residential use. Meets or Exceeds ANSI A14.9.
Automatic Super Simplex Disappearing Stairways
This is the patented push-button version of the Super Simplex. Available in fully automatic (Model S4000 series - push a button to open/close the door panel and fold/unfold the sections) for ceiling heights up to 13’ 6”. Ceiling heights up to 16’ can be accommodated on the semi-automatic Model S3000 series. On these models, the door panel will open/close at the push of a button and the user then manually unfolds/folds the sections.
Automatic Electric Disappearing Stairways
This heavy-duty disappearing stairway will handle a 1,000 pound load. It has one-piece siderails of 7” x .230” Aluminum Channel, and is operated with a simple toggle switch. Standard equipment includes battery backup power to allow the stair to be opened in the event of a power failure.
Fixed Aluminum Wall Ladders
Precision’s line of wall ladders includes FL Series (channel siderails) and FLH Series (tubular siderails). These ladders will handle a 1,500 pound load without failure, and individual treads have been tested to 3,000 pounds without deformation. As always, these ladders meet or exceed the design requirements of OSHA 1910, Subpart D and/or ANSI A14.3.
Aluminum Ships Stairs
These stairs provide a comfortable climb with a pitch in the range of 60° - 70° and an ample clear tread size of 5 3/16” x 30”. A handrail of 1 1/2” diameter is also provided. Load capacity is 1,000 pounds.
Fixed Aluminum Industrial Stairways
Fabricated to meet or exceed OSHA 1910.24. Available only in aluminum in climbing angles from 30° - 50°, fabricated to meet or exceed the appropriate OSHA code and shipped fully assembled to the job site, ready to install.
Aluminum Alternating Tread Stairs
Precision’s Aluminum Alternating Tread Stair is an alternative to a traditional ships stair, and allows a climber to descend face-forward giving a clear view of the floor below.
Precision’s line of roof hatches have been around since the early 1990s. They are available in both galvanized and aluminum. Precision keeps an inventory of several common sizes on hand, available for quick shipping.
This category includes Precision’s Extend-A-Rail which provides a hand-hold to aid in mounting or dismounting a ladder through a roof hatch, Safety Cage, Security Door, Security Gate for retrofitting a ladder, and Aluminum Guard Rail Systems for protecting floor or roof openings.
Precision Ladder inquiries in Delaware, Minnesota, Northwestern Peninsula of Michigan, West Virginia or Wisconsin, contact BMSI at 763-252-5555. ALL other inquiries contact Precision Ladders at 423-586-2265 for your territory rep.
Completely assembled at factory, this hanger model has a 72-coat capacity with a single shelf. Note: Hangers not included. Floor Rack Information Height: 63" (81" compacted) Depth: 27" (27" compacted) Width: 72" (21" compacted) Color Options: Bl..
Forty double-pronged nylon hooks are virtually indestructible and lock inside radiused aluminum shelves. 40 hooks provided accommodate 80 coats. Floor Rack Information Height: 63" (81" compacted) Depth: 27" (27" compacted) Width: 72" (21" compacte..
Control VOC emissions in manufacturing and electronics assembly or repair areas that use cleaning agents or other hazardous chemicals Safely dispense solvents and control volatile organic compounds (VOCs) with an FM approved Bench Top Solvent Can. C..
000001 HRD WHEEL SET OF 4. All Midland Chute products are manufactured in the USA. This product meets current NFPA requirements. Proper working wheels are important to protect the building in the event of a fire. The discharge door panel rolls on the..
000002 HRD SPRING SET OF 2. All Midland Chute products are manufactured in the USA. This product meets current NFPA requirements. This chute discharge spring closer is made to fit a Horizontal Rolling Discharge door and is often be used for Midland C..
The only spill platforms made from recycled polyethylene! Get reliable, high performance spill control and help reduce landfills by using recycled products. These economical, low profile secondary containment platforms are eco-friendly- made of up t..